[Juniper] Password Recovery J Series
Untuk reset password JunOS J Series atau recovery yg pertama dilakukan adalah console sudah pasti 
Kemudian coba restart (hardware) dan perhatikan proses bootingnya.
Jika sudah pada proses dibawah tekan “space” untuk command prompt
FreeBSD/i386 bootstrap loader, Revision 0.8
(builder@vasuki.juniper.net, Fri Apr 13 22:08:17 GMT 2007)
Loading /boot/defaults/loader.conf
/kernel text=0×4956b7 data=0×3b994+0×5884a syms=[0x4+0x59fd0+0x4+0x664de]
Hit [Enter] to boot immediately, or space bar for command prompt.
Type ‘?’ for a list of commands, ‘help’ for more detailed help.
ok boot -s
Setelah itu masukan command boot -s seperti contoh diatas atau pada gambar
setelah itu tunggu sampe pada proses :
Booting single-user
/dev/ad0s1a: 279 files, 70731 used, 147308 free (52 frags, 18407 blocks, 0.0% fragmentation)
/dev/bo0s1e: 5 files, 6 used, 24385 free (9 frags, 3047 blocks, 0.0% fragmentation)
System watchdog timer disabled
Enter full pathname of shell or ‘recovery’ for root password recovery or RETURN for /bin/sh: recovery
ketikan “recovery” seperti contoh diatas / gambar
sampai pada proses cli seperti dibawah ketik
“edit” untuk memluai config dilanjutkan dengan “set system root-authentication plain-text-password”
untuk merubah password baru.
Performing checkout of management services …
NOTE: Once in the CLI, you will need to enter configuration mode using
NOTE: the ‘configure’ command to make any required changes. For example,
NOTE: to reset the root password, type:
NOTE: configure
NOTE: set system root-authentication plain-text-password
NOTE: (enter the new password when asked)
NOTE: commit
NOTE: exit
NOTE: exit
NOTE: When you exit the CLI, you will be asked if you want to reboot
NOTE: the system
Starting CLI …
root@router> edit
Entering configuration mode
[edit]
root@router#
root@router# set system root-authentication plain-text-password
New password:
Retype new password:
[edit]
setelah itu “commit” dan exit exit untuk restart
root@router# commit check
configuration check succeeds
[edit]
root@router# commit
commit complete
[edit]
root@router#
root@router# exit
Exiting configuration mode
root@router> exit
Reboot the system? [y/n] y
semoga bermanfaat
- Ervin Taufik -